Call us: 9:00am - 6:00pm


S7 (DIN-1.2357)

  • Home
  • Our Products
  • Cold Work Steel


S7 is a general purpose air hardening tool steel having high impact and sock resistance. it has good resistance to softening at moderately high temperatures. This combination of properties makes it suitable for many hot-work and cold-work applications.

Applications : Chisels, rivet sets, punches, driver bolts. Hot punching and shearing.

Physical properties (average values) at ambient temperature : Density [gcm ³] : 7.86

Chemical Composition : (%)

C Si Mn Cr
0.45-0.60 0.45-0.55 0.65-0.80 3.20-3.40
Mo Ni V W
1.50 -- 0.20-0.35 --

Grades Equivalent :

1.2357 OH253 50CrMoV13-1 -- S7

Coefficient of Linear Thermal Expansion 10¯6 °C¯¹

20-100°C 20-200°C 20-300°C 20-400°C
11.7 12.9 13.3 13.8
20-500°C 20-600°C 20-700°C
14.1 14.3 14.6

Soft Annealing : Heat 810-850 °C, cool slowly in furnace. This will produce a maximum brinell hardness of 229.

Stress Relieving : To Relieve machining stresses for greater accuracy in hardening - first rough machine, then anneal below the critical 649/677 °C a minimum of one hour at temperature and cool slowly, then finish machine.

Hardening : Harden from a temperature 930-960 °C followed by air or oil quenching. Hardness after quenching is 59-61 HRC.

Tempering : Tempering temperature: 150-400 °C

Tempering Temperature(°C) vs. Hardness (HRC)

100°C 200°C 300°C 400°C
59 57 54 53
500°C 550°C 600°C 650°C
52 52 48 41

Forging Hot forming temperature : 1060-1121 °C

Machinability : The machinability of S7 alloy may be rated at about 75/80 % of a 1% carbon tool steel.

Corrosion Resistance : Corrosion resistance of this alloy is better than that of plain carbon steels. However it will rust unless given protective treatment.

Forms manufactured : Please see Dimensional Sales Programe.

Get in Touch

Please Feel Free to Contact Us